DRILL PRESSES
Handle more jobs better, faster with a Heavy-Duty 20″
Metal Muncher Two Speed drill press.
Included Features
- Infinitely Variable Speed Countershaft Drive
- Dial to the best rpm for the tool and material while running
- 150 to 2000 rpm speeds
- Drill large holes, small holes, spot face, counterbore and ream.
- A flip of the switch changes from low range to high range.
- Rated for 1″ in cast iron, 3/4″ in steel
- Optional power feed.
- Spindle Guard that locks in place
- Heavy-duty precision head
- Precision bored surfaces for exact alignment
- 3 MT spindle with 6-1/2″ travel, 2-1/2″ diameter quill and thread adjustable depth stop.
- 4″ column with 3/16″ thick wall for great rigidity and accuracy.
- Precision ground 22″ x 19″ coolant trough table.
- Handles large parts and fixtures.
- Three V-belts and a cog belt transmit positive power to the spindle.
- Clausing’s heavy-duty drive delivers full power to spindle at all speeds.
- Optional Electrical Equipment
- 2-speed, 3-phase, 220v or 2-speed, 3-phase, 440v
- 11⁄2 Hp, 3-ph, 1140 rpm, 11⁄2 Hp, 1-ph, 1725 rpm, 11⁄2 Hp, 3-ph, 1725 rpm
Spindle Guard
Locks in upright position for easy tool change.
Style A Floor Drill Table
22” x 19.5” (559 x 495mm) Table, 66″ (1676mm) column standard and 1/2″cored T-slots on 9″ centers
for table and base.
Style B Head And Column Assembly
Mounted on optional 20-501 Table Assembly.
Powerful Countershaft Drive
Three V-belts and a cog belt transmit positive power
to the spindle.
Drill Specifications
Handle more jobs … better, faster with a Clausing 20″ Two Speed drill press. Clausing’s heavy-duty drive delivers full power to
spindle at all speeds.
Click the link below to download our complete Drill Press specifications worksheet to find the machine that works for you.
Drill Additional Options
Configure our Drill Presses to meet your production demands with the large variety of available options. There’s one to meet your every needs.
Multiple Spindle Drill Presses
Clausing multiple spindle drill presses can be custom built with up to four 20″ heads. Mix and match any number of drill heads as your requirements demand.
Leading technology for the past 100 years.
Putting America Back To Work!
Kalamazoo Metal Muncher is committed to bringing manufacturing, and more importantly, manufacturing jobs back to the United States.
These products are entirely made in the USA. Castings, parts production and assembly are completed in Ohio. Final inspection, calibration and accessories are completed in the Kalamazoo Metal Muncher facility in Kalamazoo, Michigan.
